| Name: |
LakeDawg
- 
|
|
| Subject: |
Blown piston
|
|
Date:
|
7/6/2008 3:53:50 PM
|
I have a 1994 90 h.p. Force on a pontoon that has been diagnosed with a "blown piston". Does anyone have a shop to recommend in the Lake Martin area? What is the approximate cost for repair? The boat is at one of the larger marina's, but instead of repairing the problem, they just want to sell me a new motor & throttle set up for $5,000 - $6,000, which is more than the boat is worth. Thanks for any help.
|
| Name: |
Kizma Anuice
-
|
|
| Subject: |
Blown piston
|
|
Date:
|
7/6/2008 11:07:08 PM
|
It will cost more to rebuild a Force than it is worth. You should look for a used motor, not a Force. Then sell yours on e-bay as-is
|
| Name: |
crappyattitude
-
|
|
| Subject: |
Blown piston
|
|
Date:
|
7/8/2008 3:05:43 PM
|
Just make sure that you explain the problem with the Force when you put the ad on Ebay. Otherwise you could be held liable.
Crappy
|
| Name: |
Swimmer27
-
|
|
| Subject: |
Blown piston
|
|
Date:
|
7/8/2008 4:26:44 PM
|
Not really, all private sales are 'AS IS' unless specified otherwise.
Caveat Emptor
|
| Name: |
CAT BOAT
-
|
|
| Subject: |
Solution....
|
|
Date:
|
7/8/2008 10:27:33 PM
|
I have a complete Engine/cable assem set-up for your boat. How big is the "Toon boat". Engine is 2000 model Merc. V-6 200hp with 25 hours. Mint cond. If your "Toon Boat" is large enough, we'll put it on.
|
| Name: |
BoatsRFun
-
|
|
| Subject: |
Solution....
|
|
Date:
|
7/9/2008 11:49:18 AM
|
Hmmm...from a 90hp to a 200hp....atleast you would be able to out run a thunderstorm....better check the "capacity plate"...lol
|
| Name: |
crappyattitude
-
|
|
| Subject: |
Blown piston
|
|
Date:
|
7/9/2008 12:50:23 PM
|
What I meant was...... you should tell whatever you know about it.....other wise you be liable to a real "a__ whuppin".
Crappy : )
|
| Name: |
CAT BOAT
-
|
|
| Subject: |
Solution....
|
|
Date:
|
7/9/2008 11:50:50 PM
|
True... True....
|
| Name: |
Chevy4x4
-
|
|
| Subject: |
Capacity Plate!?!?!?!
|
|
Date:
|
7/10/2008 6:18:41 PM
|
Who actually uses those things!
Honestly....
lol
|
| Name: |
Swimmer27
-
|
|
| Subject: |
Capacity Plate!?!?!?!
|
|
Date:
|
7/11/2008 2:39:06 PM
|
You will after the first time the WP pulls you over and checks you. It is one of the things they are trained to check. That old of toon boat is going to have smaller toons and I would bet not rated for that big a motor. That is not a cheap ticket either.
|
| Name: |
Chevy4x4
-
|
|
| Subject: |
Chill Swimmer :)
|
|
Date:
|
7/12/2008 4:52:13 PM
|
Was just giving cat and his "every thing needs 500 more HP" attitude a hard time...
Although I tend to agree :)
|
| Name: |
CAT BOAT
-
|
|
| Subject: |
Chill Swimmer :)
|
|
Date:
|
7/12/2008 10:26:51 PM
|
Actually, everything does need 500 Hp or more. So they can get out of the way of others. : )
|
| Name: |
LakeDawg
-
|
|
| Subject: |
Chill Swimmer :)
|
|
Date:
|
7/12/2008 11:01:09 PM
|
The plate does say 90hp is the max. Out of curiosity, is there a ballpark estimate for a repair. I mainly want the boat for my 23 year old to have available for him and his friends so I don't have to take em out in my new 24' Sea Ray cause they ain't gettin the keys to that. The toon has been kept lifted in a boat house since new, so it is still in excellant shape for its age. Thanks for the help.
|
| Name: |
CAT BOAT
-
|
|
| Subject: |
Chill Swimmer :)
|
|
Date:
|
7/14/2008 9:29:31 AM
|
You want me to check on a price for a new powerhead? That is probably the cheapest, least expensive way to go. Email me at Cathousemarine@aol.com
|
| Name: |
CAT BOAT
-
|
|
| Subject: |
Opppsss
|
|
Date:
|
7/14/2008 3:59:02 PM
|
No longer available. Let me regroug and think......
|
| Name: |
Kizma Anuice
-
|
|
| Subject: |
CAT isn't there a place
|
|
Date:
|
7/14/2008 6:04:51 PM
|
down around st. pete that has a rebuild exchange for power heads.
i have bought pwc long blocks form them and you can get a 2 year warranty.
if you are not familiar with them I have the info in my office. they only sell to established legitimate businesses. I guess that means the cathouse.
|
| Name: |
Maverick
-
|
|
| Subject: |
Try this Place
|
|
Date:
|
7/14/2008 9:38:26 PM
|
One of the nicest gentlemen you will ever speak with. Have heard he is the whos who of outboard motors and not just Mercury either.
Shop in Florida, but lives in Hawaii. Now that is the life.
URL: http://maxrules.com
|
| Name: |
CAT BOAT
-
|
|
| Subject: |
OK
|
|
Date:
|
7/14/2008 10:52:05 PM
|
Now, looks as though you both put me on a mission. Matters not... Cat to the rescue. Thanks for the info. Kizma, where is my cold one you promised? And, Mav, I have your truck now. "Bling it On". Ha .. two year anniversary last Friday. Time flies.
|
| Name: |
Maverick
-
|
|
| Subject: |
Rebuild Kit - $740.00
|
|
Date:
|
7/15/2008 12:30:07 AM
|
Force 90 HP 91-98 Powerhead Rebuild Kit
Rebuild kits include all of the following items, as required, unless noted:
- PISTONS/ RINGS/ WRISTPINS/ RETAINERS.
- COMPLETE GASKET & SEAL KIT.
- CRANKSHAFT MAIN BEARINGS
- CONNECTING ROD LARGE & SMALL END BEARINGS.
- CONNECTING ROD BOLTS
- CRANKSHAFT SEAL RINGS ON FORCE/MERCURY PRODUCTS WHERE NEEDED
- GASKET SEALING COMPOUNDS AND CRANKCASE SEALER.
- TECHNICAL ASSISTANCE FROM THE MASTERTECH.
- HIGH-PERFORMANCE WISECO Pistons In Our Kits!
URL: http://www.maxrules.com/fixphead.html
|
| Name: |
Maverick
-
|
|
| Subject: |
But I Have a Question
|
|
Date:
|
7/15/2008 12:41:02 AM
|
If piston blown, no reason to rebuild the powerhead till you determine what caused the blown piston.
The most common causes of engine failure are detonation, pre-ignition, and overheating or any combination thereof. The result of these problems is that the temperature in the combustion chamber gets too high. As soon as the temperature in the chamber gets higher than normal the engine begins to run poorly and the damage to the engine begins. Detonation is usually caused by the air/fuel mixture being lean and the erosion of the piston starts at the edge or outer diameter of the piston. If the erosion starts in the center of the piston it is probably an ignition problem. An engine running hot due to deteriorated water pump or cooling system blockage compounds the problem.
So even if the powerhead is rebuilt if you do not correct the orignal issue which caused the failure then next thing you know you have another blown piston.
But Cat is the expert here not me and I am sure if he rebuilds the powerhead he will properly diagnose the orignal issue which caused the failure in the first place.
|
| Name: |
CAT BOAT
-
|
|
| Subject: |
But I Have a Question
|
|
Date:
|
7/15/2008 9:41:33 AM
|
EXACTLY...
|
| Name: |
Kizma Anuice
-
|
|
| Subject: |
I can answer that
|
|
Date:
|
7/15/2008 11:03:46 AM
|
THERE IS NO WAY THIS MOTOR IS WORTH REPAIRING.
FORCE MOTORS ARE CRAPP FROM THE GET GO. Made with cheap off spec parts.
You must always rebuild the carbs, before you put them back and that alone will cost about 125/carb
this is like repairing a YUGO
|
the name of the place is PMC north america. I bought several 3 cylinder jet ski motors for $790 a pop, two years ago. phone number is727-539-0714
|
| Name: |
Lakeshore
-
|
|
| Subject: |
OK
|
|
Date:
|
7/17/2008 9:21:34 PM
|
FYI- PMC went under and was bought by SBT (Short Block Technologies) at auction.
|
| Name: |
MrHodja
-
|
|
| Subject: |
FORCE is an acronym
|
|
Date:
|
8/13/2008 5:39:49 PM
|
A friend in the boat business in Mississippi says it stands for "F-ing Old Repainted Chrysler Engine"
:>)
Nasreddin Hodja
|
|
New Post
Search
Boat Maintenance Forum
Reply
»
Florida Coast
»
Panama City Beach Gulf Coast
Login
|
Home
