Boat Maintenance: trim oil, again...
(Clarks Hill - Strom Thurmond Lake Specific)
21 messages
Updated 2/9/2020 10:26:23 PM
Lakes Online Forum
84,091 messages
Updated 11/8/2024 10:28:12 AM
Lakes Online Forum
5,204 messages
Updated 9/14/2024 10:10:50 AM
(Clarks Hill - Strom Thurmond Lake Specific)
4 messages
Updated 3/7/2018 4:55:07 PM
Lakes Online Forum
4,172 messages
Updated 9/9/2024 5:04:44 PM
Lakes Online Forum
4,262 messages
Updated 11/6/2024 6:43:09 PM
Lakes Online Forum
2,979 messages
Updated 6/26/2024 5:03:03 AM
Lakes Online Forum
98 messages
Updated 4/15/2024 1:00:58 AM
|
|
|
I don't understand. How high will it trim?
It should trim up to about 50 maybe 60 Deg... I have never measured the degree at full trim. You should hear it bog down when it get's to it's max. You need to fill the reservoir and cycle it up and down several times to get any air out of it. And it may jump and kick as you do this. Then add more if it needs it and cycle again till you have all the air out and the fluid dribbles out the fill point at full up. If it's leaking down over night or at all really, you need to rebuild your lift cylinders.
I am not the resident mechanic on this site and don't want to tread on his territory. You need to call CAT if your not sure what to do.
|
|