Name:   Shortbus - Subject:   Boat lift motor problem Date:   10/31/2016 6:54:11 PM

@ Hodja     Correct

@ Lifer       There is no difference between a 220 shock and a 110 shock.  Usually someone contacts a hot leg and is shocked to ground.   The shock is the same 110v.    You have to try to get a 220v shock.  In England you get a 220v shock.

The way not to be electrocuted is to never stand in water and never grab around a pipe.  Electrocution happens when your muscles tense and grab you tighter into the juice.  Touching with a finger will knock you away.

@  Dead Timbers      Too small a wire or too low volts for 3/4 horse is still too small for 1 horse. Call manufacturer with boat weight.

The 220 shock hazard is same as 110.    Install 110 ground fault outlets or breaker if concerned.