Name:	lucky67 -	Reply
Subject:	Boat detailing
Date:	10/19/2020 1:54:20 PM

Is it recommended to have one cleaned before winter ? I keep it uncovered in boat house

Name:	wix -	Reply
Subject:	Boat detailing
Date:	10/23/2020 8:40:12 PM

You’ll have about 1/4” of pollen next spring everywhere on boat.  Why no cover?  Even a “blue Polly” will help.

Name:	lucky67 -	Reply
Subject:	Boat detailing
Date:	10/24/2020 11:29:33 AM

my experience for several years when I did put on the cover was that i had more mold than without the cover

Name:	wix -	Reply
Subject:	Boat detailing
Date:	10/24/2020 3:28:08 PM

What I’ve been doing for many years:  Make sure boat is dry on the inside cover and place a small electric fan under the cover and let it run all winter.  Mold doesn’t like dry surfaces and wind!  Key is boat must be dry before covering.

Name:	Shortbus -	Reply
Subject:	Boat detailing
Date:	11/3/2020 1:34:03 AM (updated 11/3/2020 1:47:05 AM)

After several years of testing I think I have mastered mold.

Vacuum boat to get out the food.

Wash boat.  Use bleach & some degreaser and surfactants.  or

https://www.zep.com/product/zepcommercial/mold-mildew-stain-remover

Rinse forever with a pressure washer.

Put out in the sun.

Bring into the boathouse and use a clear shell product.  Zep Clear Shell has passed my shower curtain test.

https://www.zep.com/product/zepcommercial/Clear-Shell-Mold-and-Mildew-Inhibitor

Wipe evenly for protection and anti-mottling.

Kiss the mold good bye.

Name:	lucky67 -	Reply
Subject:	Boat detailing
Date:	11/3/2020 8:36:30 AM

Shortbus where to buy the Zep to ou mentioned ?

Name:	Shortbus -	Reply
Subject:	Boat detailing
Date:	11/3/2020 5:18:18 PM

Wal Marts, Home Depot, Ebay, Amazon, etc.

Name:	Lifer -	Reply
Subject:	Boat detailing
Date:	11/6/2020 7:15:38 AM

Shorty is right.  The boat MUST be before being covered.  I ususally let ours dry at least two days before covering, depending on weather. Also take everything out of the storage compartments and let them dry seperately.  Prop the seats open and let the inside dry also.  A fan is a good idea, so are some type of absorbant, charcoal or silica works well. 

As for cleaning, if you do it in the fall, you still have to do it in the spring.  Wipe it down good, dry it out, cover and store under roof if possible.

Name:	GarnaPara -	Reply
Subject:	Boat detailing
Date:	2/3/2024 1:51:46 AM

Feeling overwhelmed? Write my lab report – a plea answered by our skilled writers. https://paperwriter.com/write-my-lab-report Entrust your experiment's intricacies to professionals who bring clarity to chaos. Choose from Ph.D. experts, ensuring a personalized touch. It's not just a report; it's your academic prowess illuminated, seamlessly and affordably.